Investigation on La3+ and Dy3+ co-doped ceria ceramics with an optimized average atomic number of dopants for electrolytes in IT-SOFCs

In the present study, we investigate the fundamental properties of CeO₂ by selecting La³⁺ (57), and Dy³⁺ (66) as dopants with optimized average atomic number of 61.5, which lies in between Pm³⁺ (62) and Sm³⁺ (62) in accordance with the criteria for optimum doping. A system of co-doped ceria ceramics Ce_1–x–yLa_xDy_yO_2-δ ((x, y) = (0.00, 0.00), (0.025, 0.025), (0.05, 0.05), (0.075, 0.075), (0.10, 0.10), (0.00, 0.20) and (0.20, 0.00)) as electrolytes for intermediate temperature solid oxide fuel cells were successfully prepared by a well-known sol-gel auto-combustion route. In order to obtain dense samples, the prepared pellets were sintered in air at 1300 °C for 4 h using conventional furnace and relative densities of all the samples were found to be higher than 95%. Single phase cubic structure, microstructural density and elemental composition analysis of all the samples were studied by powder X-ray diffraction, scanning electron microscope and energy dispersive spectroscopy techniques, respectively. Raman spectroscopy analysis confirmed the formation of concentrated O^2-–vacancies in the co-doped ceria system. Impedance spectroscopy measurements revealed the high value of total ionic conductivity and low activation energy for the composition Ce_0.85La_0.075Dy_0.075O_2?δ i.e., 2.08 × 10^–2 S cm^–1 and 0.58 eV, respectively. Linear thermal expansion analyses of all the samples revealed the matched thermal expansion coefficients. Finally, these results recommend that the Ce_0.85La_0.075Dy_0.075O_2?δ sample can be useful as a solid electrolyte in IT-SOFC applications.     

金属增材制造技术研究热点聚类分析

为深入分析金属增材制造技术分类和发展状况,采集中国期刊全文数据库(CNKI)收录的核心期刊上的768篇科技文献,借助文献分析可视化软件CiteSpace,对关键词聚类进行了全景式描绘,构建金属增材制造技术知识图谱,揭示该技术研究分类以及演化趋势。     

水氯镁石制备金属镁的过程集成与能量分析

以无水氯化镁和氧化镁作为中间产物，电解和热还原为两个关键方法，集成各种相关过程，构建了从水氯镁石到金属镁的综合过程网络，其中涉及24个物种、20个化学过程和25个工艺路线；建立了最低能耗分析模型用于简单和复合过程的能量分析；利用物质的标准生成焓和多温等压摩尔热容，计算得出全部反应过程及工艺过程的能量消耗和热量移除。结果表明基于还原法的最优路径是水氯镁石用石灰法转为氢氧化镁，进而煅烧成氧化镁，再铝热还原成金属镁，该过程能耗360.15 kJ/mol，放出热量–315.46 kJ/mol；基于电解法的最优路径是石灰乳法生成氢氧化镁，再煅烧成氧化镁，通过在熔融电解质中电解生成金属镁，该过程能耗738.54 kJ/mol，放出热量–135.42 kJ/mol。无水氯化镁制备耗能高，不在最优路径中。     

Interleukin-1β Modulation of the Mechanobiology of Primary Human Pulmonary Fibroblasts: Potential Implications in Lung Repair

Pro-inflammatory cytokines like interleukin-1β (IL-1β) are upregulated during early responses to tissue damage and are expected to transiently compromise the mechanical microenvironment. Fibroblasts are key regulators of tissue mechanics in the lungs and other organs. However, the effects of IL-1β on fibroblast mechanics and functions remain unclear. Here we treated human pulmonary fibroblasts from control donors with IL-1β and used Atomic Force Microscopy to unveil that IL-1β significantly reduces the stiffness of fibroblasts concomitantly with a downregulation of filamentous actin (F-actin) and alpha-smooth muscle (α-SMA). Likewise, COL1A1 mRNA was reduced, whereas that of collagenases MMP1 and MMP2 were upregulated, favoring a reduction of type-I collagen. These mechanobiology changes were functionally associated with reduced proliferation and enhanced migration upon IL-1β stimulation, which could facilitate lung repair by drawing fibroblasts to sites of tissue damage. Our observations reveal that IL-1β may reduce local tissue rigidity by acting both intracellularly and extracellularly through the downregulation of fibroblast contractility and type I collagen deposition, respectively. These IL-1β-dependent mechanical effects may enhance lung repair further by locally increasing pulmonary tissue compliance to preserve normal lung distension and function. Moreover, our results support that IL-1β provides innate anti-fibrotic protection that may be relevant during the early stages of lung repair.     

井下作业面巷道切顶卸压施工设计探究

以井下作业面巷道切顶卸压施工设计为对象开展探究,结合具体工程实际,从切顶卸压爆破施工设计和爆破施工分析两个角度,对切顶卸压技术的全面应用进行总结分析,希望能够为其他矿井相似工程的开展提供借鉴与参考。     

3D MHD cross flow over an exponential stretching porous surface

The present study aims to investigate the effects of thermal‐diffusion and diffusion‐thermo onan magnetohydrodynamic convective flow of viscous fluids over an exponentially stretching sheet. Thermal radiation effects are also considered in the study. This analysis is carried out in three dimensions and a similarity transformation is adopted to get a set of ordinary differential equations from a set of partial differential equations. And the Fourth‐order Runge‐Kutta method and shooting technique along with the secant method are employed to find out an iterative solution. We also analyze here the influence of the variable magnetic field, nonuniform permeability and variable chemical reaction on the fluid flow. The impact of various pertinent parameters of interest has extensively been explored through graphs and tables. The major findings of the present study are that resistive Lorentz force diminishes the fluid velocity and uplifts the thermal as well as concentration fields. Inclusion of porous matrix improves the viscous drag force which in turn augments wall shear stresses and peters out the heat and mass transfer rates from the sheet. In addition, the thermal expansion coefficient has an inverse relation with temperature.     

闭式外腔循环太阳能墙集热效果实验研究

文章设计了闭式外腔循环太阳能墙系统,从理论和实验两方面研究太阳能墙传热传质规律。以大连市冬季为研究背景,基于对实验测温点不同时刻的持续监测,从逐时曲线中分析了不同环境下闭式外腔循环系统内部温度以及室内获得热量后室温的变化情况。结果表明,太阳能墙集热效率与太阳辐射强度密切相关,在晴朗天气下,白天部分时段单一太阳能墙就能满足采暖要求,不满足采暖要求时可以选择空气源热泵辅助采暖。     

Kevlar织物软壁包容环抗冲击数值仿真分析研究

针对机匣包容性问题,提出Kevlar平纹织物本构模型的拟合方法,分别采用单层壳、多层壳、层合壳三种有限元建模方式对Kevlar织物软壁包容环弹道冲击过程进行模拟,发展了机匣包容性仿真分析模型。结果表明,多层壳模型和层合壳模型的计算结果更准确,并且可以通过调节摩擦因子使仿真结果与试验结果更接近。在此基础上研究了撞击点位置和弹体入射姿态对弹体剩余速度的影响。结果表明:在较小偏移距离内,撞击点的位置对剩余速度的影响可以忽略不计;滚转角和俯仰角对剩余速度影响较小,而对于偏航角,当角度大于30°时,剩余速度会随着角度的增大明显呈下降趋势,且弹体出射姿态也会发生明显变化。     

大数据环境下基于K中心点优化算法的Web服务组合

在当前Web服务海量增加、现有Web服务选择算法低效、用户匹配度差的基础上，针对K中心点算法存在的质点偏移、准确率低和容易发生畸变等问题，提出一种大数据环境下基于K中心点优化算法的Web服务组合方法。该方法是在大数据环境下，根据不同用户需求满意度及Web服务QoS参数，对基于优化初始聚类中心的K中心点算法的Web服务选择及最优Web服务组合进行研究。同时针对不同的选择方法对服务动态选择及组合的准确度、迭代更新次数、候选集选择时间及选择总时间进行实验分析，验证了本文研究方法的有效性和可靠性。